Sidewinder XTR Automated Side Loader

“After 10 minutes of testing the truck, we knew this was the truck for Rutherford. The quality and construction are top-notch."
Rutherford DPW - Rutherford, NJ

TRACTION IN ANY ENVIRONMENT

An Automated Side Loader with One-Operator Efficiency

Efficiency is always at your side with the New Way^® Sidewinder XTR^™ Automated Side Loader. With a fast compaction rate unrivaled by other side loader refuse trucks and the industry’s strongest frame-mounted arm — with an impressive reach of 12 feet — this truck is a powerful addition to your fleet. The Sidewinder combines the convenience of automated loading with the ability to maneuver in tight spaces to create an ultra-tough, overbuilt side-loading machine.

At the end of the day, the convenient features of the Sidewinder XTR are even more evident. Garbage truck operators appreciate the convenience of being able to easily clean out behind the RAM with the widest opening access and largest clean-out sump in the refuse industry. Add to that the standard rear-view camera and a two-year cylinder warranty, and you can see why the Sidewinder XTR has a solid grip on the competition.

Ease of Operation

Fully automated, the Sidewinder improves efficiency as a single-operator vehicle.

Flexing Its Muscle

The Sidewinder takes on any task with the strongest automated arm in the industry.

Easy Access

Cleaning out this automated truck is a breeze with extra large clean-out doors for ease of access.

Contact

Download PDF Flyer

View Specifications

Standard

Standard Specifications

Click the tabs below to cycle between specifications.

General Specifications

Hydraulic Cylinder Specs

General Specifications
Model	22 A	24 A	29 A	31 A
Model	22 A	24 A	29 A	31 A
Body Capacity	22 yd³	24 yd³	29 yd³	31 yd³
Body Width - Outside	96"	96"	96"	96"
Body Width - Inside	Front: 76 5/8"; Rear: 87"	Front: 76 5/8"; Rear: 87"	Front: 76 5/8"; Rear: 87"	Front: 76 5/8"; Rear: 87"
Body Length	237"	247"	286"	297"
Body Length - Tailgate Raised	276"	286"	326"	336"
Body Height	108"	108"	108"	108"
Body Height - Tailgate Raised	213"	213"	213"	213"
Approx. Body Weight* (Empty & Exclusive of Options)	11,400 lbs	12,000+ lbs	12,000+ lbs	13,000 lbs
Hopper Capacity	6 yd³	6 yd³	6 yd³	6 yd³

Hydraulic Cylinder Specifications
Model	22 A	24 A	29 A	31 A
Arm Gripper Cylinder	1 1/2" x 5" x 1"	1 1/2" x 5" x 1"	1 1/2" x 5" x 1"	1 1/2" x 5" x 1"
Arm Vertical Lift Cylinder	3" x 16" x 2"	3" x 16" x 2"	3" x 16" x 2"	3" x 16" x 2"
Arm Mast Horizontal Cylinder	2" x 54" x 1 1/4"	2" x 54" x 1 1/4"	2" x 54" x 1 1/4"	2" x 54" x 1 1/4"
Tailgate Cylinder	3" x 30" x 2"	3" x 30" x 2"	3" x 30" x 2"	3" x 30" x 2"
Packer Panel Cylinder	4" x 43" x 2.5"	4" x 43" x 2.5"	4" x 43" x 2.5"	4" x 43" x 2.5"
Body Hoist Cylinder	6 1/2" x 150" 4 Stage	6 1/2" x 150" 4 Stage	6 1/2" x 180" 4 Stage	6 1/2" x 180" 4 Stage
Hopper Packer Panel Cover Cylinder	2" x 18" x 1 1/4"	2" x 18" x 1 1/4"	2" x 18" x 1 1/4"	2" x 18" x 1 1/4"

Chassis Minimum Requirements
Model	22 A	24 A	29 A	31 A
Minimum GVWR**	46,000 lbs.	46,000 lbs.	64,000 lbs.	64,000 lbs.
Cab to Trunnion	160"	160"	194"	194"

‡ - Length measured depends on options ordered.

* - Approximate Body Weight empty and exclusive of options.

** - Any Chassis sent to Scranton Manufacturing with less than the minimum guideline requirements will not be mounted. (Chassis must be capable of carrying the net weight of the body plus the weight of the refuse collected.)

Sidewinder XTR Body Construction Specifications

Click the panels below to expand the desired specifications.

Body Specs

	22 A	24 A	29 A	31 A
Main Body Rails	1/4" x 3" x 8" Tube	1/4" x 3" x 8" Tube	1/4" x 3" x 8" Tube	1/4" x 3" x 8" Tube
Floor	3/16" AR400	3/16" AR400	3/16" AR400	3/16" AR400
Ejection Panel Tracks	3/8" x 3"	3/8" x 3"	3/8" x 3"	3/8" x 3"
Side Walls	10 Ga. Hardox 450	10 Ga. Hardox 450	10 Ga. Hardox 450	10 Ga. Hardox 450
Roof	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K
Rear Frame	7 Ga. 50 K	7 Ga. 50 K	7 Ga. 50 K	7 Ga. 50 K
Mid Body Hopper Wall	1/4" AR400	1/4" AR400	1/4" AR400	1/4" AR400
Left Side Hopper Wall	Upper 10 Ga. 50K, Lower 1/4" AR400	Upper 10 Ga. 50K, Lower 1/4" AR400	Upper 10 Ga. 50K, Lower 1/4" AR400	Upper 10 Ga. 50K, Lower 1/4" AR400
Hopper Floor	1/4" AR400	1/4" AR400	1/4" AR400	1/4" AR400
Packer Swept Volume	1.8 Yd³	1.8 Yd³	1.8 Yd³	1.8 Yd³
Hopper Packer Panel Cover	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K
Front Packer Panel Cyl Supports	1/2" 50K	1/2" 50K	1/2" 50K	1/2" 50K

Tailgate Specs

	22 A	24 A	29 A	31 A
Capacity	2yd³	4yd³	2yd³	4yd³
Opening Height	92 5/16"	92 5/16"	92 5/16"	92 5/16"
Width	87"	87"	87"	87"
Tailgate Frame	7 Ga. 50K	7 Ga. 50K	7 Ga. 50K	7 Ga. 50K
Tailgate Bubble	10 Ga. Hardox 450	10 Ga. Hardox 450	10 Ga. Hardox 450	10 Ga. Hardox 450
Tailgate Side	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K	10 Ga. 80K
Tailgate Seal Height	30"	30"	30"	30"
Tailgate Hinge Lugs	1 1/4" T1	1 1/4" T1	1 1/4" T1	1 1/4" T1

Arm Specs

	22 A	24 A	29 A	31 A
Arm Reach	144"	144"	144"	144"
Arm Lifting Capacity **	Up to 1000 lbs.	Up to 1000 lbs.	Up to 1000 lbs.	Up to 1000 lbs.
No. Horizontal Mast Bearing	6	6	6	6
Arm Cycle Time	6-8 secs.	6-8 secs.	6-8 secs.	6-8 secs.
Arm Channel	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb

Packer Panel Specs

	22 A	24 A	29 A	31 A
Packer Cycle Time	21 secs.	21 secs.	21 secs.	21 secs.
Ram Penetration	8 1/2"	8 1/2"	8 1/2"	8 1/2"
Ram Compaction Farce	70,000 lbs. @ 3,000 psi	70,000 lbs. @ 3,000 psi	70,000 lbs. @ 3,000 psi	70,000 lbs. @ 3,000 psi
Face Sheet	1/4" AR 400	1/4" AR 400	1/4" AR 400	1/4" AR 400
Cylinder Pin	2" I.D. 1144 Stress Proof	2" I.D. 1144 Stress Proof	2" I.D. 1144 Stress Proof	2" I.D. 1144 Stress Proof

Hydraulic System Specs

	22 A	24 A	29 A	31 A
Tank Capacity	70 Gal	70 Gal	70 Gal	70 Gal
Oil Flow Rate Body	20 gpm @ 750rpm	20 gpm @ 750rpm	20 gpm @ 750rpm	20 gpm @ 750rpm
Oil Flow Rate Arm	18 gpm @ 750rpm	18 gpm @ 750rpm	18 gpm @ 750rpm	18 gpm @ 750rpm
Filter	Spin-on 10 Micron	Spin-on 10 Micron	Spin-on 10 Micron	Spin-on 10 Micron
Hoses	4-To-1 Burst	4-To-1 Burst	4-To-1 Burst	4-To-1 Burst
Operating Pressure Body	2,500 psi	2,500 psi	3,000 psi	3,000 psi
Operating Pressure Arm	2,000 psi	2,000 psi	2,000 psi	2,000 psi

** - May require optional equipment.

Looking for Metric conversions of the specs? View them here →

Metric

Metric Specifications

Click the tabs below to cycle between specifications.

General Specifications

Hydraulic Cylinder Specs

General Specifications
Model	20 A	22 A	24 A	29 A	31 A
Body Capacity	18.3m³	20.1m³	21.9m³	26.5m³	28.3m³
Body Width - Outside	243.8cm	243.8cm	243.8cm	243.8cm	243.8cm
Body Width - Inside	Front: 194.6cm; Rear: 221cm	Front: 194.6cm; Rear: 221cm	Front: 194.6cm; Rear: 221cm	Front: 194.6cm; Rear: 221cm	Front: 194.6cm; Rear: 221cm
Body Length	602cm	602cm	627.4cm	729cm	754.4cm
Body Length - Tailgate Raised	701cm	701cm	726.4cm	828cm	853.4cm
Body Height	274.3cm	274.3cm	274.3cm	274.3cm	274.3cm
Body Height - Tailgate Raised	542.3cm	542.3cm	542.3cm	542.3cm	542.3cm
Approx. Body Weight* (Empty & Exclusive of Options)	5171 kg	5171 kg	5443+ kg	5443+ kg	5897 kg
Hopper Capacity	5.5³	5.5³	5.5³	5.5³	5.5³

Hydraulic Cylinder Specifications
Model	20 A	22 A	24 A	29 A	31 A
Arm Gripper Cylinder	3.8cm x 12.7cm x 2.5cm	3.8cm x 12.7cm x 2.5cm	3.8cm x 12.7cm x 2.5cm	3.8cm x 12.7cm x 2.5cm	3.8cm x 12.7cm x 2.5cm
Arm Vertical Lift Cylinder	7.6cm x 16" x 5.1cm	7.6cm x 16" x 5.1cm	7.6cm x 16" x 5.1cm	7.6cm x 16" x 5.1cm	7.6cm x 16" x 5.1cm
Arm Mast Horizontal Cylinder	5.1cm x 137.2cm x 3.2cm	5.1cm x 137.2cm x 3.2cm	5.1cm x 137.2cm x 3.2cm	5.1cm x 137.2cm x 3.2cm	5.1cm x 137.2cm x 3.2cm
Tailgate Cylinder	7.6cm x 76.2cm x 5.1cm	7.6cm x 76.2cm x 5.1cm	7.6cm x 76.2cm x 5.1cm	7.6cm x 76.2cm x 5.1cm	7.6cm x 76.2cm x 5.1cm
Packer Panel Cylinder	11.4cm x 109.2cm x 7.6cm	11.4cm x 109.2cm x 7.6cm	11.4cm x 109.2cm x 7.6cm	11.4cm x 109.2cm x 7.6cm	11.4cm x 109.2cm x 7.6cm
Body Hoist Cylinder	16.5cm x 381cm 4 Stage	16.5cm x 381cm 4 Stage	16.5cm x 457.2cm 4 Stage	16.5cm x 457.2cm 4 Stage	16.5cm x 457.2cm 4 Stage
Hopper Packer Panel Cover Cylinder	5.1cm x 45.72cm x 3.2cm	5.1cm x 45.72cm x 3.2cm	5.1cm x 45.72cm x 3.2cm	5.1cm x 45.72cm x 3.2cm	5.1cm x 45.72cm x 3.2cm

‡ - Length measured depends on options ordered.

* - Approximate Body Weight empty and exclusive of options.

Sidewinder XTR Body Construction Specifications

Click the panels below to expand the desired specifications.

Body Specs

	20 A	22 A	24 A	29 A	31 A
Main Body Rails	0.6cm x 7.6cm x 20.3cm Tube	0.6cm x 7.6cm x 20.3cm Tube	0.6cm x 7.6cm x 20.3cm Tube	0.6cm x 7.6cm x 20.3cm Tube	0.6cm x 7.6cm x 20.3cm Tube
Floor	0.5cm AR400	0.5cm AR400	0.5cm AR400	0.5cm AR400	0.5cm AR400
Ejection Panel Tracks	1cm x 3"	1cm x 3"	1cm x 3"	1cm x 3"	1cm x 3"
Side Walls	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450
Roof	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K
Rear Frame	26.5L 50 K	26.5L 50 K	26.5L 50 K	26.5L 50 K	26.5L 50 K
Mid Body Hopper Wall	0.6cm AR400	0.6cm AR400	0.6cm AR400	0.6cm AR400	0.6cm AR400
Left Side Hoper Wall	Upper 37.9L 50K, Lower 0.6cm AR400	Upper 37.9L 50K, Lower 0.6cm AR400	Upper 37.9L 50K, Lower 0.6cm AR400	Upper 37.9L 50K, Lower 0.6cm AR400	Upper 37.9L 50K, Lower 0.6cm AR400
Hopper Floor	0.6cm AR400	0.6cm AR400	0.6cm AR400	0.6cm AR400	0.6cm AR400
Packer Swept Volume	1.7 m³	1.7 m³	1.7 m³	1.7 m³	1.7 m³
Hopper Packer Panel Cover	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K
Front Packer Panel Cyl Supports	1.3cm 50K	1.3cm 50K	1.3cm 50K	1.3cm 50K	1.3cm 50K

Tailgate Specs

	20 A	22 A	24 A	29 A	31 A
Capacity	1.8m³	1.8m³	3.7m³	1.8m³	3.7m³
Opening Height	234.5cm	234.5cm	234.5cm	234.5cm	234.5cm
Width	221cm	221cm	221cm	221cm	221cm
Tailgate Frame	26.5L 50K	26.5L 50K	26.5L 50K	26.5L 50K	26.5L 50K
Tailgate Bubble	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450	37.9L Hardox 450
Tailgate Side	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K	37.9L 80K
Tailgate Seal Height	76.2cm	76.2cm	76.2cm	76.2cm	76.2cm
Tailgate Hinge Lugs	3.2cm T1	3.2cm T1	3.2cm T1	3.2cm T1	3.2cm T1

Arm Specs

	20 A	22 A	24 A	29 A	31 A
Arm Reach	365.8cm	365.8cm	365.8cm	365.8cm	365.8cm
Arm Lifting Capacity **	Up to 453.592 kg	Up to 453.592 kg	Up to 453.592 kg	Up to453.592 kg	Up to 453.592 kg
No. Horizontal Mast Bearing	6	6	6	6	6
Arm Cycle Time	6-8 Seconds	6-8 Seconds	6-8 Seconds	6-8 Seconds	6-8 Seconds
Arm Channel	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb	Channel (4) Standard 5 Nb; Channel (2) Standard 6 Nb

Packer Panel Specs

	20 A	22 A	24 A	29 A	31 A
Packer Cycle Time	20s.	20s.	20s.	20s.	20s.
Ram Penetration	21.59cm	21.59cm	21.59cm	21.59cm	21.59cm
Ram Compaction Farce	31751.5 kg @ 2,500 psi	31751.5 kg @ 2,500 psi	31751.5 kg @ 2,500 psi	31751.5 kg @ 2,500 psi	31751.5 kg @ 2,500 psi
Face Sheet	0.6cm AR 400	0.6cm AR 400	0.6cm AR 400	0.6cm AR 400	0.6cm AR 400
Cylinder Pin	5.1cm I.D. 1144 Stress Proof	5.1cm I.D. 1144 Stress Proof	5.1cm I.D. 1144 Stress Proof	5.1cm I.D. 1144 Stress Proof	5.1cm I.D. 1144 Stress Proof

Hydraulic System Specs

	20 A	22 A	24 A	29 A	31 A
Tank Capacity	265L	265L	265L	265L	265L
Oil Flow Rate Body	94.6 lpm @ 750rpm	94.6 lpm @ 750rpm	94.6 lpm @ 750rpm	94.6 lpm @ 750rpm	94.6 lpm @ 750rpm
Oil Flow Rate Arm	64.4 lpm @ 750rpm	64.4 lpm @ 750rpm	64.4 lpm @ 750rpm	64.4 lpm @ 750rpm	64.4 lpm @ 750rpm
Filter	Spin-on 10 Micron	Spin-on 10 Micron	Spin-on 10 Micron	Spin-on 10 Micron	Spin-on 10 Micron
Hoses	4-To-1 Burst	4-To-1 Burst	4-To-1 Burst	4-To-1 Burst	4-To-1 Burst
Operating Pressure Body	2,200 psi	2,500 psi	2,500 psi	3,000 psi	3,000 psi
Operating Pressure Arm	2,000 psi	2,000 psi	2,000 psi	2,000 psi	2,000 psi

** - May require optional equipment.

Looking for Standard conversions of the specs? View them here →

Photo Gallery

Standard Equipment

Pack-on-the-Go
Twin 14.5” x 7” clean out doors
Chrome cylinder rods w/scrapers
Interlocked side access hopper door
Nitro carbonite single-hoist cylinder
Sight gauge on reservoir tank
Tailgate ajar alarm
Imron elite productive paint
High-grade hydraulic fluid
Dual camera system
Reinforced frame-mounted arm
In-line heavy duty grippers
Sealed roller bearings on packer follower panels
Ergonomic in-cab control panel and joystick
Smooth body sidewall design
Positive automatic tailgate lock
Back-up alarm
Body ajar alarm
Hour meter
“Arm stowed” indicator
LED safety lights & reflectors
ANSI Z245.1-2017 compliant
Multi-cycle packer
Home position arm lock
Fold-up valve door

Optional Equipment

Hydraulic hopper cover
300 gallon gripper
Camera options
Additional arm controls
Hopper ladder
Broom/shovel racks
Arm cycle counter
CNG powered
West Coast/Lightweight model also available (1,500 lbs reduction)
In-cab adjustable gripper pressure
Also available in 18, 20 and 33 yd models
Choice of control systems:

Air over hydraulic controls
CAN bus controls for in-cab diagnostics

XTR Premium Features

The Industry's Strongest Arm Design

The industry's proven most durable arm configuration— a frame-mounted arm with a gripper that's in line with the arm— has been reinforced by New Way^® engineers with heavier steel and hardware, giving you the strongest and most dependable side-loader arm ever built. It's built for the abuse of big routes and designed to keep you on the road, day in and day out.

Inline Lifting — 3inch Bore Lift Cylinder

Larger Outside Bearings — Thicker I-Beams

Tough on Trash. Easy On Operators.

The Sidewinder's™ ergonomic in-cab controls are specifically designed for operator comfort. Operator fatigue is decreased while productivity is boosted, putting true power at your fingertips.

All Trucks Need Maintenance (Ours Just Need Less.)

The Sidewinder™ is rated for a lifespan that keeps you operating with confidence far beyond competitors' models, with significantly lower maintenance costs and minimized downtime. When you do need maintenance, our design enables super-easy access for quicker, less expensive part replacement.

Easy Access for Maintenance — Nitro Carbonite Single Cylinder

More dependability.
Longer lifespan. Heavier payloads.

The New Way^® Sidewinder™ puts your fleet in a position of power. Built for punishment, your crew can keep on operating while other trucks are in the shop. So while this truck is tough, it makes one thing not so tough - the decision to add one to your fleet.

Hardox 450 Body & Tailgate Construction

New Way's advanced grade of high tech AR steel provides superior strength and less weight than traditional steel.

Heavy Duty Packer Panel

Sealed roller bearings and a simplified hydraulic system ensure minimum maintenance and ultimate performance.

Huge Compaction Rates

With the highest ram penetration in the industry, we pack away more and help increase efficiency. Available in 20, 22, 24, 29, and 31yd³ capacities.

Reinforced Frame-Mounted Arm

Boasting a 1000lb. capacity at its maximum reach of 12 feet, our arm unit has the highest lift capacity in the industry. Plus, it'll keep you moving with its 6-8 second cycle time.

Axalta Elite Paint

This paint line has been used by the U.S. Coast Guard for vehicles that regularly endure salt spray conditions. We bake on one of Axalta's toughest paints, providing a finish that's both attractive and highly durable.

Automated Side Loader Comparison

Sidewinder XTR
ROTO PAC^®
Wolverine^™

Hopper Capacity

Sidewinder XTR
6 YD³
ROTO PAC^®
5.7 YD³
Wolverine^™
3.3 YD³

Body Capacity

Sidewinder XTR
22 to 31 YD³
ROTO PAC^®

14 to 27 YD³
Wolverine^™
10 to 14 YD³

Second Cycle Time

Sidewinder XTR
8 Sec.
ROTO PAC^®
6 to 8 Sec.
Wolverine^™
8 to 10 Sec.

Body Weight*

Sidewinder XTR
11.4K - 13K
ROTO PAC^®
13K

Compaction Rates

Sidewinder XTR
800 lbs.
ROTO PAC^®
1K lbs.

* - Approximate Body Weight empty and exclusive of options.

View Graph Break Down →

Sidewinder XTR Automated Side Loader

TRACTION IN ANY ENVIRONMENT